Silicone Roof Coatings

White Silicone Roof Coating, Explained

By Polo International 3 min read

HENRY Co

By Polo International, Fort Lauderdale · License CCC1329676 · Updated November 2026

The short answer

Liquid silicone sprayed over a flat or low-slope roof. It cures into one seamless, waterproof membrane that stands up to ponding water and sun, and its white surface reflects sunlight. It only works over a dry, solid roof.

You may have seen it called silicone spray roofing, a silicone roof system or a silicone roof restoration. Here’s what it is, how a crew applies it, when it can go over your roof and when it can’t, and what keeping it white takes.

A Polo crew spraying a white coating over a dark commercial roof
A Polo crew spraying a white coating over a dark commercial roof (a frame from our own job video).

What it is, and why white matters

Florida’s building code names three roof coatings, each with the lab test it has to pass: silicone (ASTM D6694), acrylic (D6083) and moisture-cured polyurethane (D6947). Over an existing roof, silicone goes on as one layer with no seams, and it holds up to water that sits after rain and to the sun.

White matters in South Florida. The EPA describes a cool roof as one that takes in less of the sun’s heat than a conventional roof. Light-colored coatings like this are on its list of cool roof products for flat roofs. The Cool Roof Rating Council rates how much sunlight a roof product reflects and how well it sheds heat, so you can look up the coating on your quote.

How a crew sprays it on

  1. We look at the roof first

    We walk it, find any wet or damaged areas and send a written quote with the system and the price.

  2. Wet spots come out

    Wet insulation or damaged deck gets cut out and replaced, so the coating goes over a dry, solid roof.

    Florida Building Code 1511.3

  3. Clean, then seal the details

    We pressure-wash the roof, then seal the seams, the flashing, every pipe and the raised curbs that hold rooftop equipment.

  4. Silicone goes on

    Liquid silicone is sprayed on as one seamless layer and cures into a waterproof membrane.

In Broward and Miami-Dade, the work needs a permit, and the building official inspects permitted roofing work.

Silicone as a full roof restoration

We coat whole roofs. The roof is cleaned, wet or damaged areas are cut out and replaced, and the whole surface is coated, so the old roof stays on under one new seamless membrane. That’s what we did on 585,357 sq ft at the Port of Jacksonville in November 2019.

Whether a coating fits depends on how much of the roof is still dry. If too much of it is wet, the roof needs replacing instead. Size matters here too: under Florida’s 25% rule, work on more than a quarter of a roof or roof section in 12 months can require the whole roof or section to meet current code, unless it was built to the 2007 code or later. Our Florida roof rules guide explains it.

Drone view of the Port of Jacksonville warehouse roof partway through its silicone coating, with a ship-to-shore crane and a container ship alongside
The Port of Jacksonville warehouse roof partway through its silicone coating: 585,357 sq ft, finished in November 2019.

“Polo International Roofing exceeded our expectations with their exceptional service on our commercial space’s silicone roof. … they also completed our project ahead of schedule.”

“Polo International did [an] excellent job coating our 40 unit condo flat roof.”

A coating, or a new roof? We’ll tell you which, in writing.

Keeping a white roof white

A white roof only reflects heat while it’s clean. The EPA notes that low-slope cool roofs may need periodic cleaning to keep their reflectance. The National Roofing Contractors Association recommends inspecting roofs and making needed repairs twice a year, with extra checks after severe weather.

Our roof inspections and maintenance program does both: the crew pressure-washes the roof, checks and seals the penetrations, seams, edge metal, gutters and downspouts, and coats any spot that no longer seals.

The downsides, plainly

  • It’s a coating, not a new roof. It can’t save a roof that’s soaked through.
  • The prep decides the result: it needs a clean, dry, sealed surface to bond to.
  • It collects dirt, and needs cleaning to stay reflective.

White silicone roof coating in Fort Lauderdale

Polo International installs silicone roof coating from our Fort Lauderdale office. Our project list has 19 silicone roofs in Florida, Georgia, Missouri, Tennessee and Texas, 1,794,868 sq ft for the 14 with a listed size. Coatings come with a warranty of up to 20 years, and your written proposal names your roof’s term. Want the bigger picture? Read how silicone roofing works, compare commercial flat roof coatings, or see what a commercial roof coating costs. See where we work.

Questions owners ask

What is white silicone roof coating?

A liquid silicone that’s sprayed over a flat or low-slope roof and cures into one seamless, waterproof membrane. It holds up to ponding water and sun, and the white surface reflects sunlight. Florida’s code tests silicone coatings to ASTM D6694.

How is silicone roof coating applied?

After the roof is inspected and any wet areas are cut out and replaced, it’s pressure-washed, the seams, flashing, pipes and curbs are sealed, and the silicone is sprayed on as one layer. In Broward and Miami-Dade, the job needs a permit.

Can silicone fix a leaking roof?

Yes, when the leak is in one area or the roof is mostly dry: the wet part is cut out and rebuilt, then sealed and coated. If the roof is soaked through, Florida’s code requires the old roofing to come off first.

What are the downsides of silicone roof coating?

It can’t fix a wet roof underneath, it needs a clean, dry, well-prepared surface to bond to, and like any white roof it collects dirt and needs cleaning to stay reflective.

How do you clean a silicone-coated roof?

We pressure-wash it as part of our maintenance program, then check and reseal any spot that needs it. Keeping it clean is what keeps a white roof reflective, as the EPA notes for low-slope cool roofs.

What warranty comes with a silicone coating?

Up to 20 years for labor and material, depending on the system. Your written proposal names your roof’s term before any work starts.

Sources

  1. Florida Building Code, Building, 8th edition (2023), Chapter 15: Table 1507.14.3 (protective coating standards), sections 1511.1.1, 1511.3, 1512.3, 1512.4.1. codes.iccsafe.org
  2. U.S. Environmental Protection Agency, “Using Cool Roofs to Reduce Heat Islands.” epa.gov
  3. Cool Roof Rating Council, About (solar reflectance and thermal emittance ratings). coolroofs.org
  4. National Roofing Contractors Association, Professional Roofing, “Maintaining compliance,” February 2024. professionalroofing.net

Get a quote for your roof

Polo International has sealed more than 50 million square feet of roofs since 2008. We’ll put the system, the price and the warranty in writing.

More guides for building owners

All guides

Get a written quote for your roof

Tell us about the building. We inspect the roof first, then put the system, the scope and the warranty in writing.