By Polo International, Fort Lauderdale · License CCC1329676 · Updated November 2026
The short answer
You’ll see three types quoted: acrylic, silicone and moisture-cured polyurethane. On flat roofs we install silicone, because it stands up to ponding water and sun.
If you manage a flat roof in Fort Lauderdale, you’ve probably been pitched a coating. Any coating only works over a dry, solid roof, applied by a licensed crew to the maker’s instructions. Here’s which coating types the code names, whether your roof can take one, how a commercial silicone roof coating is installed, and how to choose the installer.
Three coating types, one code
Florida’s building code names three roof coatings, each with the ASTM lab test it has to pass. Ask which test the coating on your quote meets.
| Coating | Test standard in Florida’s code |
|---|---|
| Acrylic | ASTM D6083 |
| Silicone | ASTM D6694 |
| Moisture-cured polyurethane | ASTM D6947 |
On commercial flat roofs we install silicone. It goes over built-up, modified bitumen, metal, concrete and single-ply roofs, cures into one seamless membrane, and holds up to water that sits after rain and to ultraviolet light. When a roof also needs insulation or slope to drain, spray foam with a silicone topcoat is the other option: see how SPF roofing systems are built.
Can your flat roof be coated?
Florida’s code says when a new roof can’t go over the old one (section 1511.3). Your roof needs a tear-off instead of a coating when:
- It’s water-soaked, or so deteriorated it can’t hold another layer.
- It already has two or more roof coverings.
- It has blisters that aren’t cut or scraped open and secured first.
Wet areas in an otherwise sound roof are cut out and replaced before coating. If the work would touch more than a quarter of the roof or roof section in 12 months, the 25% rule can require the whole roof or section to meet current code, unless it was built to the 2007 code or later (section 1511.1.1).
A Fort Lauderdale example
The Robert P. Kelley Building, for the Housing Authority of the City of Fort Lauderdale, got a silicone roof coating restoration in December 2024: 19,619 sq ft, with the existing roof kept in place. Farther north, DRA Advisors hired us for three warehouse roofs in Atlanta, Jonesboro (Georgia) and Jacksonville: 634,671 sq ft between them, all silicone roof restorations.

“We recently contracted Polo International to seal coat the flat roofs for our clubhouse. Not only was the work completed in a timely manner, the workers kept the workspace tidy and were very reliable.”
“We’ve been using Polo International for years on several of our commercial buildings. They do a great job. Very professional.”
How a silicone coating is installed on a commercial flat roof
-
Inspect and quote
We walk the roof, find any wet or damaged areas and send a written quote with the system and the price.
-
Permit and setup
In Broward and Miami-Dade, the permit comes first, even for repair or maintenance work. The crew sets up equipment and protects walkways and railings on the way to the roof.
Florida Building Code 1512.3
-
Wet areas out
Wet insulation or damaged deck is cut out and replaced, so the coating goes over a dry, solid roof.
Florida Building Code 1511.3
-
Pressure-wash, then seal the details
The roof is pressure-washed, then the seams, flashing, pipes and the curbs under rooftop equipment are sealed.
-
Silicone goes on
Liquid silicone goes on as one seamless layer, to the manufacturer’s instructions, and cures into a waterproof membrane. The building official inspects permitted roofing work.
Florida Building Code 1512.4.1

Have a flat roof that needs a coating, or an answer? Get it in writing.
Choosing a roof coating installer
- A Florida contractor license you can look up with the state’s DBPR. Ours is CCC1329676.
- Certified by the coating’s manufacturer. We’re a certified installer for GE Silicones, Henry, Gaco Western and more.
- The coating product and how much goes on, named in the quote.
- The permit and inspections included, and who pulls them.
- The warranty in writing: who gives it, and the term.
- Proof of insurance, and references from buildings like yours.
Commercial flat roof coatings in Fort Lauderdale
Polo International installs silicone roof coating on warehouses, shopping centers, condos and public buildings from our office at 1001 NW 62nd Street in Fort Lauderdale. Our project list has 19 silicone roofs, and coatings come with a warranty of up to 20 years; your proposal names your roof’s term. See our warehouse and industrial roofs, what white silicone roof coating is, and what a commercial roof coating costs. See where we work.
Questions owners ask
What’s the best coating for a commercial flat roof?
There isn’t one right answer for every roof. On flat roofs in South Florida, where water often sits after rain, we install silicone because it holds up to ponding water and sun. If the roof also needs insulation or slope, spray foam with a silicone topcoat may fit better.
What are the downsides of silicone roof coating?
It can’t fix a wet roof underneath, it needs a clean, dry, well-prepared surface to bond to, and like any white roof it collects dirt and needs cleaning to stay reflective.
What is the 25% rule for roofing?
Under Florida’s building code, repairing, replacing or recovering more than 25% of a roof or roof section within 12 months can require the whole roof or section to meet current code, unless it was built to the 2007 code or later. Our Florida roof rules guide has the details.
Does the building have to close while the roof is coated?
Usually not. The building keeps running underneath while the crew works on the roof, and we protect the walkways and railings on the way up.
How do I choose a roof coating installer?
Check the Florida license with DBPR, ask whether they’re certified by the coating’s maker, and get the product, the amount, the permit and the warranty in writing. Ask for proof of insurance and references.
Can any flat roof be coated?
No. Florida’s code requires the old roofing to come off when it’s water-soaked or deteriorated, has two or more coverings, or has blisters that aren’t opened and secured. Otherwise, wet spots are cut out and the roof can usually be coated.
Sources
- Florida Building Code, Building, 8th edition (2023), Chapter 15: Table 1507.14.3 (protective coating standards), sections 1511.1.1, 1511.3, 1512.3, 1512.4.1. codes.iccsafe.org
- Florida Department of Business and Professional Regulation, license search. myfloridalicense.com
Get a quote for your roof
Polo International has sealed more than 50 million square feet of roofs since 2008. We’ll put the system, the price and the warranty in writing.




